Campbell-scientific CS110 Electric Field Meter Manual do Utilizador descarregar pdf (Página 53)

Appendix C. CS110 Connector Pin-outs

The following information describes the connectors that mate with the built-in

(bulkhead) connectors on the CS110. Connector pin numbering for the 6 and 9

pin connectors are shown below. The view is a view of the solder-cup side of

the cabled connector. The circular connectors are Mini-Con-X type from

Conxall. The CSI part numbers shown for the connectors include the

backshell. CSI fills the backshell with a relatively thick epoxy to seal and

provide strain relief.

2 9

3 8

POWER CONNECTOR

CS110CBL3-L CS110 Power Cable

Connector is female and is CSI PN 17654 (Conxall #6282-6SG-522 or

Switchcraft #EN3C6F). Pin 1 is indicated with a dot.

Pin Description Color

1 C1 Control Port 1 Blue

2 +12 V Power Red

3 Gnd Digital Ground Drain (clear)

4 P_Gnd Power Ground Black

5 C3 Control Port 3 Green

6 C2 Control Port 2 Yellow

WIND CONNECTOR

Connector is male and is CSI PN 9889 (Conxall #6282-6PG-522 or Switchcraft

#EN3C6M). Pin 1 is indicated with a dot.

Pin Description

1 2LO Single-ended channel 4

1 1Mohm Pin 1 also connects to ground via a 1 Mohm 1% 50ppm resistor

2 Gnd Panel Ground

3 EX2 Excitation channel 2

4 P1 Pulse channel 1

5 Gnd Power ground

6 Gnd Ground

C-1

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 87 88

Sem comentários

Campbell-scientific CS110 Electric Field Meter Manual do Utilizador Página 53