Campbell-scientific UT20 and UT30 Tower-based Weather Stations Manual do Utilizador descarregar pdf (Página 38)

UT20 and UT30 Tower-based Weather Stations

FIGURE 8-9. COM220 modem with surge protector

8.3.3 Cellular Transceivers

Campbell Scientific offers two digital cellular modems — the RavenXTV

CDMA modem and the LS300G 3G GSM Cellular Gateway modem. Refer to

our product brochure for information on choosing the right cellular modem for

your weather station.

Mount the digital cellular modem in the enclosure as shown in FIGURE 8-10

with the following steps:

1. Mount the modem to the enclosure backplate using the hardware provided

in the pn 14394 or pn 30988 mounting kit.

2. Connect the modem to the datalogger’s CS I/O port via the SC105

interface or connect the modem to the datalogger’s RS-232 port via the pn

14392 Null Modem Cable.

3. Mount the cellular Yagi antenna on a grounded mast, positioning it to

point toward the nearest cellular tower, with the radiating elements

oriented vertically. Route the coaxial cable into the enclosure through the

wiring port and connect it to the cellular transceiver’s coaxial connector.

Provide strain relief for the cable on the left side of the enclosure with a

cable tie and tab.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 73 74

Sem comentários

Campbell-scientific UT20 and UT30 Tower-based Weather Stations Manual do Utilizador Página 38