Campbell-scientific 020C Wind Direction Sensor Manual do Utilizador

Model 020CWind Direction SensorRevision: 5/12Copyright © 2012Campbell Scientific, Inc.

Model 020C Wind Direction Sensor 3. Select 020C Wind Direction Sensor and select the right arrow to add it to the list of sensors to be measured. 4

Model 020C Wind Direction Sensor 5. Sensor connections to the CR1000 datalogger are shown in the Wiring tab. In applications with tight power budget

Model 020C Wind Direction Sensor 7. A full description of sensor wiring can be found by selecting Wiring Diagram at the left of the Short Cut window.

Model 020C Wind Direction Sensor 6. Specifications Features • Low starting threshold • Internal heater for long bearing life • Low profile to mini

Model 020C Wind Direction Sensor 7. Installation Before installation: • Check to see that the vane assembly rotates freely. • Ensure that the vane

Model 020C Wind Direction Sensor Alignmentset screw CM220 mounting bracket BushingCM200-series crossarm FIGURE 7-1. 020C mounted with CM200-series c

Model 020C Wind Direction Sensor TABLE 7-1. 020C Wiring Wire Color Wire Description CR23X CR800-series CR1000 CR3000 CR5000 CR10(X) CR500 CR

Model 020C Wind Direction Sensor 'Main Program BeginProg 'Main Scan Scan(1,Sec,1,0) 'Default Datalogger Battery Voltage measurem

Model 020C Wind Direction Sensor 8. Troubleshooting and Maintenance 8.1 Troubleshooting Consult Table 8-1 for recommended actions to resolve various

Model 020C Wind Direction Sensor EPA, 1987: On-Site Meteorological Program Guidance for Regulatory Modeling Applications, EPA-450/4-87-013, Office of

Model 020C Wind Direction Sensor 14

Appendix A. Wind Direction Sensor Orientation A.1 Determining True North and Sensor Orientation Orientation of the wind direction sensor is done aft

Appendix A. Wind Direction Sensor Orientation FIGURE A-1. Magnetic declination for the contiguous United States (2004) A-2

Appendix A. Wind Direction Sensor Orientation FIGURE A-2. Declination angles east of true North are subtracted from 360° to get true North FIGURE

Appendix A. Wind Direction Sensor Orientation A-4

Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com • info@campbel

Warranty “PRODUCTS MANUFACTURED BY CAMPBELL SCIENTIFIC, INC. are warranted by Campbell Scientific, Inc. (“Campbell”) to be free from defects in materi

Assistance Products may not be returned without prior authorization. The following contact information is for US and international customers residing

020C Table of Contents PDF viewers: These page numbers refer to the printed version of this document. Use the PDF reader bookmarks tab for links to

020C Table of Contents ii Figures 4-1. Installation of 020C Wind Vane... 2 7-1. 020C mount

Model 020C Wind Direction Sensor 1. Introduction The Model 020C Wind Direction Sensor measures azimuth with research-grade accuracy and precision. C

Model 020C Wind Direction Sensor 1. Remove the orientation screw from the base of the sensor column. Place the sensor column in the bushing such tha

Model 020C Wind Direction Sensor 4.2 Programming with Short Cut Short Cut Program Generator for Windows can be used to program the CR1000 datalogger