Campbell-scientific NL100 Network Link Interface Manual do Utilizador descarregar pdf (Página 28)

NL100/105 Network Link Interface

In the LoggerNet communications software, the phone modem on the

NL100/105 side should be shown attached to the IPPort. The datalogger is then

shown as connected to the remote phone modem. Refer to Figure 6 below.

FIGURE 6. LoggerNet Setup for NL100/105 to Phone to Datalogger Connection

3.3 NL100/105 to Datalogger Connections - CR9000/CR5000

3.3.1 Software Setup

As an alternative to LoggerNet, PC9000 software (version 3.5 or higher) can

be used to communicate with the CR9000 and CR5000 dataloggers via the

NL100/105 and a TCP/IP Network. To configure the software for

communication, choose the Tools | CommLink menu option. From the I/O Port

drop-down list box, select NET. On the bottom left side of the screen, there are

fields in which to type the TCP/IP address and the port number. The setup

should look similar to Figure 7, below.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 41 42

Sem comentários

Campbell-scientific NL100 Network Link Interface Manual do Utilizador Página 28