Campbell-scientific RAWS-H Remote Automated Weather Station Manual do Utilizador descarregar pdf (Página 12)

RAWS-H Remote Automated Weather Station

4.4 Wind Speed and Direction

The wind set attaches to the connector labeled WS/WD; this connector is color

coded red. The wind set is internally wired from the RAWS connector panel to

the CR1000 datalogger.

TABLE 4-4. WS/WD Connector (color coded red)

Connector Pin Description CR1000 Terminal

A Sensor Ground

B Wind Direction Excitation VX2

C Wind Direction Signal 2H

D Power Ground G

E +12 V power 12V

F Wind Speed Signal P1

4.4.1 SDI-12 Sensor

An SDI-12 sensor can be attached to the connector labeled SDI-12; this

connector is color coded yellow. The SDI-12 sensor is internally wired from

the RAWS connector panel to the CR1000 datalogger.

TABLE 4-5. SDI-12 Connector (color coded yellow)

Connector Pin Description Datalogger Connection

A SDI-12 Signal C7

B 12 V 12V

C Power Ground G

4.5 Fuel Moisture and Fuel Temperature

The Campbell Scientific CS506 and CS205 sensors are combined into one

connector (pn CS516-LQ). This sensor is internally wired from the RAWS

connector panel to the CR1000 datalogger. This sensor attaches to the

connector labeled FM/FT, which is color coded brown.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Sem comentários

Campbell-scientific RAWS-H Remote Automated Weather Station Manual do Utilizador Página 12