Campbell-scientific HydroSense II Support Software User Guide Manual do Utilizador descarregar pdf (Página 69)

Section 7. Error Codes

Try the following steps to rectify the issue:

Make sure the HydroSense II is powered on. Check that the

display is on and responsive.

NOTE

Make sure that the HydroSense II is within range of the PC. The maximum

distance that the display can be situated away from the PC depends on the class

of the Bluetooth adapter used by the PC, as shown in TABLE 7-1. Bluetooth

Transmission Distance (p. 7-5).

TABLE 7-1. Bluetooth Transmission Distance

Bluetooth Class Maximum Distance

Class 1 5 m

Class 2 10 m

Class 3 100 m

Press the Discover button in the software again and check that a Bluetooth

symbol is shown next to the device serial number.

If a folder icon is shown instead, the software did not detect the device during

the discovery process. Restart the PC software and the HydroSense II and then

attempt another discovery.

If the device is still not discovered by the software, or if the device is being

discovered but cannot establish a connection, please report the issue to

Campbell Scientific.

7-5

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 81 82

Sem comentários

Campbell-scientific HydroSense II Support Software User Guide Manual do Utilizador Página 69