Campbell-scientific AL200 ALERT2 Encoder, Modulator, and Sensor Interf Manual do Utilizador descarregar pdf (Página 22)

AL200 ALERT2 Encoder, Modulator, and Sensor Interface

10. Troubleshooting

Problem Possible Causes

The AL200 will not transmit event-

triggered data.

• The AL200 is currently connected

to Device Configuration Utility and

data transmissions are being

suppressed.

• The event threshold is not properly

set.

• The AL200 is not currently

measuring a level that exceeds the

event threshold.

• The AL200 has not obtained an

initial GPS fix.

The Test Button is not initiating a

data transmission.

• The AL200 has not obtained an

initial GPS fix.

• The AL200 has been configured as

a datalogger peripheral and the test

button functionality has been

disabled.

The AL200 is reporting incorrect

values.

• The applied multipliers and offsets

are not correct.

• There is an issue with the attached

sensor or sensor wiring.

The radio LED is always red. • The AL200 has been configured to

keep the radio always on.

The GPS LED is on longer than the

maximum allowed on time.

• The GPS module is attempting to

obtain leap second information and

may be on for up to 13 minutes.

11. Repair

The AL200 is designed to give years of trouble-free service with reasonable

care. However, if factory repair is needed, first contact a Campbell Scientific

application engineer to obtain an RMA (Return Materials Authorization)

number. An RMA number and product-safety documents are required prior to

any repair shipments being accepted at Campbell Scientific. See the

Assistance statement at the beginning of this manual for more information.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 43 44

Comentários a estes Manuais

Sem comentários

Campbell-scientific AL200 ALERT2 Encoder, Modulator, and Sensor Interf Manual do Utilizador Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Campbell-scientific AL200 ALERT2 Encoder, Modulator, and Sensor Interf